Epson ME-300 Wicreset Supported Functions

[banhvankhanh]

Printer Model	Waste counters can be reset	Waste counters can be read	Firmware can be changed	Cartridges can be disabled	Firmware for fixing recovery mode must be enabled in the settings.	Additional information
Epson ME-300​	​	​	​	​	​	Read printer waste ink counter(s). Reset printer waste ink counter(s). Read printer status and ink levels. Read diagnostic report from the printer. Clean printhead. Run ink charging routine. Paper pass test. Paper feed test. Nozzle test. Different drop size test. Read/Write printer serial number. Read/Write printhead identifier. Read/Write printer EEPROM settings. Change firmware to RD04C4 04/04/2012 in service mode. Change firmware to RD13CC 13/12/2012 in service mode. Change firmware to RD04C4 04/04/2012 in normal mode. Change firmware to RD13CC 13/12/2012 in normal mode. Firmware update is not possible via network. Firmware update in the normal mode is not possible if printer is busy, has errors or cartridges/inks are empty. Models with similar specifications: Epson XP-202/203/206 Epson XP-201/204/208

Reset Epson ME-300 Waste Inkpad Counter: YES
Read Epson ME-300 Waste Inkpad Counter: YES
Change Firmware Epson ME-300: YES
Change Chipless Firmware Epson ME-300: NO
Epson ME-300 Firmware for fixing recovery mode: NO
Download Epson ME-300 Resetter (Wicreset Utility): Download
Download Epson ME-300 Adjustment Program: Download
Get key reset Epson ME-300: Click Here

Tutorial Video: How to check supported functions for Epson ME-300:​

Contact support for Epson ME-300:​

Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

 

[Tống Diễm Uyên]

Bạn có thể giúp tôi tìm hiểu về các chức năng được hỗ trợ trong Epson ME-300 Wicreset không?

 

[Bùi Bảo Khánh]

Trong Epson ME-300 Wicreset, các chức năng được hỗ trợ bao gồm việc đặt lại mực nạp lại, đặt lại bộ đếm trang in (page count), đặt lại cấu hình máy in và đặt lại trạng thái máy in. Ngoài ra, nó cũng hỗ trợ việc kiểm tra tình trạng mực in và thông báo lỗi nếu có.