supported-functions-for-epson-sx130.webp

Printer ModelWaste counters can be resetWaste counters can be readFirmware can be changedCartridges can be disabledFirmware for fixing recovery mode must be enabled in the settings.Additional information
Epson SX130​
✅
✅
🔴
🔴
🔴
Read printer waste ink counter(s).


Reset printer waste ink counter(s).


Read printer status and ink levels.


Read diagnostic report from the printer.


Clean printhead.


Run ink charging routine.


Paper pass test.


Paper feed test.


Nozzle test.


Read/Write printer serial number.


Read/Write printhead identifier.


Read/Write printer EEPROM settings.


Enable limited chipless mode.


Cancel limited chipless mode.


Write initial settings using SX130.
Reset Epson SX130 Waste Inkpad Counter: YES
Read Epson SX130 Waste Inkpad Counter: YES
Change Firmware Epson SX130: NO
Change Chipless Firmware Epson SX130: NO
Epson SX130 Firmware for fixing recovery mode: NO
Download Epson SX130 Resetter (Wicreset Utility): Download
Download Epson SX130 Adjustment Program: Download
Get key reset Epson SX130: Click Here

Tutorial Video: How to check supported functions for Epson SX130:​

Contact support for Epson SX130:​

Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
 
Các chức năng được hỗ trợ trong Wicreset cho máy in Epson SX130 bao gồm:
1. Đặt lại mực bộ đếm: Wicreset cho phép bạn đặt lại bộ đếm mực của máy in, giúp máy tính và máy in nhận ra mực đã được thay thế.
2. Đặt lại bộ đếm tổng số trang in: Wicreset cũng cho phép đặt lại bộ đếm tổng số trang in, để giúp bạn theo dõi lượng trang in đã hoàn thành.
3. Đặt lại bộ đếm bộ dẫn giấy và các bộ phận khác: Ngoài ra, Wicreset còn cho phép bạn đặt lại bộ đếm của các bộ phận khác trong máy in như bộ dẫn giấy, cuộn mực, đầu in, và nhiều thành phần khác.
Lưu ý: Việc sử dụng Wicreset để đặt lại các bộ đếm này có thể khác nhau tùy thuộc vào phiên bản firmware của máy in.
 
Top